Go to:

You are here:

Main content:

Header membrane keypads

Membrane keypads

Impulse on contact

The membrane keypad with its tactile action point that passes on the signal to the electronic system can be individually and universally used – in controls and instruments, mechanical engineering, white goods, medical apparatuses, consumer electronics, toys and the automotive industry.

Membrane keypad
Membrane keypad structure

Key differences

Maximum liberty in designing the surface, a closed face with embedded switches, low height (space-saving), easy to install (self-adhesive or with a supporting plate), almost scratch-proof, dust- and water-proof, simple to connect by a contact plug – a membrane keypad combines superior advantages compared to traditional operator panels.

Keypad membranes on printed circuit boards

Alternatively, a keypad membrane may be glued onto a pcb. If it is not fitted with key switches, metal domes are placed on the contact surfaces. A major advantage of this structure is that the pcb can be fitted with LEDs, resistors, etc. on both sides.

Keypad membrane Forster

Contact Austria

Your contacts:

Andreas Wimmer

Andreas Wimmer

Key Account Manager Industrial Screen Printing
07442 501-128
andreas.wimmer@forster.at

Philipp Sützl

Philipp Sützl

Sales Industrial Screen Printing
07442 501-768
p.suetzl@forster.at

Contact International

Your contact:

 

Andreas Wimmer

Key Account Manager
Industrial Screen Printing
+43 7442 501-128
andreas.wimmer@forster.at

Enquiry form

Enquiry form Industrial Screen Printing (Notice: After submitting the form a confirmation text will be shown. Fields marked with * are required.)
Enquiry form for
Contact data
Article
Keyboard/sign dimensions
Decorative film: material/imprint/embossing
Foil
Surface
Film finished with
Embossing
Vanishing effect
Keypad structure (Notice: Fill in only if you have selected Membrane keyboards)
Pressure point
EMV-shielding
LEDs on separate keypad
Keypad on pc board
Flat cable:
FCI pin connector, 2.54 mm grid
with Nicomatic Crimpflex connectors, 2.54 mm
Water-proof mounting
Base adhesive
Front plate/mounting plate/housing: (Notice: Fill in only if you have selected Front plate/housing component)
Base plate
Surface
Documents provided
Misc. – options
back to top